I need every possible specification for the ls , bore, stroke, ring gap, cam lift, everything you can think of,
plz help me people, ima nissan guy helping a freind build/ do his b18 swap and i need these specs bad
Top Ring Standard (New): 0.20 - 0.35 mm (0.008- 0.014 inch
Second Ring Standard (New): 0.40 - 0.55 mm (0.016- 0.022 inch)
Oil Ring Standard (New): 0.20 - 0.50 mm (0.008 - 0.020 inch)
cam lift, inake9.95mm exhaust 9.65mm
Standard (New) 0.020 - 0.038 mm (0.0008 - 0.0015 inch)
Main Bearing-to-Journal Oil Clearance:
No. 1, 2, 4, 5:
Standard (New) 0.024 - 0.042 mm (0.0009 - 0.0017 inch)
Standard (New) 0.030 - 0.048 mm (0.0012 - 0.0019 inch)
well damn beat me to it
graham wellington pointed me this way.
Main Bearing Cap Torque
Tighten Bearing Cap Bolts In 2 Steps.
1st step 22 ft. lbs
2nd step: 56 ft. lbs
headbolts 63 ft lbs
cam caps 7.2 ft lbs(12x7.2 for inch lbs)
youve got to meet him, hes a pretty nice guy in person, some just get so worked up by his awsomeness
get a service manual...
yeah.. 40 or so from advanced. weill tell you more than i can
Do yourself a favor and go to http://www.hondahookup.com/manuals/ and register, it takes about 30 seconds, and there are loads and loads and loads of honda manuals scanned and put into PDF format. Most of them are the actual honda service manuals and are clear scans
'04 Civic SI
INC Negro League #12
you mean piston to wall clearance?